The drying oven provides functions such as drying, baking and melting wax for industrial and mining enterprises, laboratories, and scientific research units.

 The microcomputer intelligent binocular temperature control system has temperature control protection, which is accurate and reliable. The working temperature can be set arbitrarily, and it has a deviation alarm function, and the air inlet can be switched freely for hot air circulation. Since the electrothermal dry oven is in a state of high temperature and constant temperature for a long time, the blast drying oven needs more proper maintenance. Let's talk about how to maintain and pay attention to the drying box during use.

   1. Do not put flammable items in the drying box without explosion-proof device.

   2. Before use, please pay attention to whether the voltage of the power supply used is consistent. When in use, the ground wire of the power socket must be grounded according to regulations.

   3. After each use of the blast drying box, the power must be completely cut off, and the inside and outside of the box should always be kept clean. After cleaning, hang the corresponding sign.

   4. Do not overcrowd the items in the box, and leave room for natural convection of air, so that the humid air can escape quickly on the wind top.

   5. Regularly check whether the silver contacts of the temperature regulator are hairy or uneven. If so, use fine gauze to smooth the contacts before use, and clean them frequently with a cleaning cloth to make them in good contact (note that they must be cut off) power supply). Do not hit the metal pipe of the indoor temperature regulator so as not to affect the sensitivity.

   6. When the blast drying box is powered on, do not touch the electrical parts in the space on the left side of the box with your hands or wipe it with a damp cloth and rinse it with water. The power supply should be cut off during maintenance.

   7. The power cord should not be wrapped around metal objects, and should not be installed in high temperature or humid places to prevent rubber aging and leakage.