The laboratory XFD single-cell flotation machine is a device that uses air bubbles to mix flotation agents with mineral particles, and generates air bubbles to float the minerals. The bubble generator is an important part of the flotation machine. It can generate a large number of bubbles and transport the bubbles to the flotation cell to achieve the purpose of mixing the bubbles with the flotation agent and the mineral particles.
The bubble generator of laborartory flotation separator is mainly realized by the principle of mixing compressed air and water to generate bubbles.
The specific working principle is:
The air pump compresses the air and sends it into the bubble generator.
In the bubble generator, air is mixed with water to form a liquid-gas mixture.
The liquid-gas mixture passes through devices such as nozzles or perforated plates to generate a large number of fine air bubbles.
The air bubbles enter the flotation cell machine with the water flow, interact with the flotation agent and mineral particles, and make them float up to achieve separation
In the laboratory Lab Single Cell Flotation Equipment, the working stability of the bubble generator and the size of the bubbles will have an important impact on the flotation effect. Therefore, when using the flotation machine, it is necessary to maintain and maintain the bubble generator to ensure its normal operation.
At the same time, it is also necessary to select a suitable bubble generator and air pump, adjust and optimize according to the experimental requirements, in order to obtain better flotation effect and experimental results.
